Can I add my CommandKit accessory to a different network?

Yes. You can delete your accessories from one network and add it to another. Here's how you can do it:

Ensure you do not power cycle (turn ON or OFF) your accessory during the setup process.


If error persists, reset your accessory by:

- with your accessory connected to power, press and hold the reset button on the accessory for three (3) seconds. See images below.

- release reset button

- after roughly 30 seconds, the blue light on the accessory will flash periodically then will begin flashing consistently.

- your accessory is now reset and is ready to be added to a network and a home.




Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.