How do I reset my CommandKit Accessory?

Resetting your Accessory will allow you to delete the Accessory from your network and Home.

Reset your accessory by:

- with your accessory connected to power, press and hold the reset button on the accessory for three (3) seconds. See images below.

- release reset button

- after roughly 30 seconds, the blue light on the accessory will flash periodically and then will begin flashing consistently. Note: if the Accessory is a Lightbulb Adapter, the lightbulb will turn on.

- your accessory is now reset and is ready to be added to a network and a home.


Was this article helpful?
1 out of 3 found this helpful
Have more questions? Submit a request


Article is closed for comments.